STANDARD KIT - £3399
+ VAT
Tubular space frame chassis,
shock absorbers complete with coil over springs. Front and rear
wishbones complete with
bushes & ball joints. Steering rack (used) (£95 extra
for quick rack 2.4 turns lock to lock).
Front Brakes (used).
Front uprights (used) with stub axles (drop forged steel). Rear
uprights
to take
donor drive shafts, hubs,
bearings and brakes. Rear alloy bulkhead, fly screen, centre
console, engine cover. Alloy sheet for floor, front & rear
bulkhead. 7 piece GRP set in your colour choice inc mounting
brackets for wings.
3 piece grill set, Alloy
radiator pipes (for front mounted radiator). Fuel tank (8 gallon) & locking
fuel cap.
Assembly Guide CD Rom.
|
- Seats GRP black or to match body colour
(pair bucket type) £180
- Stainless Steel Exhaust system £324
(excluding
donor manifold).
- Wiring loom with fuses/relays, lighting
set SVA O.K £412
- Roll bar and bracing (MSA spec 48.3mm
CDS) £200
(welded
to chassis during fabrication).
- Powder coating £235
- Alloy Pedal Assembly with Balance Bar & 3
Cylinders. £215
- You will need to provide pipes, clips,
rivets, screws, sealant & nuts & bolts.
Please Note: All prices are ex VAT
|
| TOTAL COST
Savings
can be made over the standard prices if your on a tight budget.
Choose to fit used seats, modify the donor exhaust or
source a lower cost lighting set. You may buy only the items
you need from a breakers yard rather than a complete car, or
you may opt for a category D donor with a V5 for only £1000.
Your budget should be around £6000.
Don't forget to sell your surplus parts
on Ebay. You will be pleasantly surprised at the prices achieved
by this modern & common
car. The air bag set alone costs £700 new (but don't touch
it until the battery has been off for at least half an hour though!)
|